Coda AMPLIFIER 15.0 Guía de usuario descargar pdf (Pagina 16)

Charnwood Dynamics Ltd. Coda cx1 User Guide – Coda Basics I - 1

CX1 USER GUIDE - COMPLETE.doc 26/04/04

16/162

The Charnwood Dynamics Quad UART boards are fitted with four 26-way high density D

sockets on the front panel for connection of the Coda interface cable(s). There are four

Coda unit power on/off switches and associated green LED indicator lights. The LEDs

show power to the Coda scanner unit(s) is on (the LEDs are only activated when there is

a Coda unit plugged in). Two sync. sockets are also provided for connection of additional

Quad UART boards or for external sync. triggering.

A single Quad UART board can support up to four Coda cx1 scanner units on RS-422.

When two or more Coda units are connected to a single Quad UART board, they are

automatically synchronized (no additional sync. cable is required – the sync. lines are

connected on the board). When two or more Quad UART boards are used to operate five

or more Coda units, the sync. Out on the first Quad UART board must be connected to

the sync. In on the second Quad UART board.

The active hub can be configured to provide interfacing for analogue and digital data

acquisition (e.g. Force-plate, EMG) using a combination of the Charnwood Dynamics 32-

channel cPCI filter board and third party 16-bit analogue I/O with digital I/O boards.

Typically, 32/64 analogue input channels and 4/8 analogue output channels can be

supported together with digital I/O.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 161 162

Sin comentarios

Coda AMPLIFIER 15.0 Guía de usuario Pagina 16